Lochnair-Labs/irtt-rs
2
0 Fork 0
Code Issues 1 Pull Requests 4 Actions 4 Packages Projects Releases 6 Wiki Activity
Files
c426884fd19822b1d19d5790a0d506e49c5a4e82
irtt-rs/docs/protocol/test-vectors/SERVER_BEHAVIORAL_VECTORS.md
T
Nils Andreas Svee 58472dbf7b docs(protocol): airlock server black-box findings 
Transfer independently black-box-verified server behavior from a source-assisted
research phase conducted outside this repository. Only a sanitizer-candidate
report of black-box findings and the packet captures it referenced were admitted;
no upstream source, tests, history, harnesses, build trees, result files or
source-assisted analysis crossed the boundary. Provenance and the boundary
discipline are recorded in docs/clean-room/CLEANROOM_NOTES.md.

New upstream robustness defect (Section 22.5). An open selecting timestamps while
omitting the Clock parameter is accepted with a valid token and no Clock echoed,
and the first echo on that session is fatal to the server process, taking
unrelated sessions on the same process with it. An explicit Clock=0 is instead
rejected at open, so parameter presence is externally meaningful. Recorded as an
observed defect with a must-not-crash recommendation; the clean server's
resolution is deliberately left to the implementation work.

Also established or strengthened:

- the idle grace and maximum-duration grace are fixed additive margins across the
  settings swept, and the maximum-duration clock starts at the first echo that is
  actually served;
- a rate-limited request is the only tested drop class that keeps a session
  alive, and in one documented configuration a conforming client can observe the
  difference;
- a post-deadline packet of several tested classes consumes an expired session's
  one remaining reply, including packets that are themselves dropped;
- the reply-length cap is the bind interface's MTU on the interfaces where it was
  reachable, and a length the host cannot transmit ends the process;
- DSCP marking follows the session, with unmarked open replies and no
  cross-session leakage across interleaved sessions;
- repeated tags are last-valid-wins, with invalid-duplicate handling scoped to
  the orders actually tested, and unknown tag values are consumed as varints.

Three captures were admitted, each rewritten to the container convention already
used here and verified byte-identical in packet data and timestamps:
server-clock-absent (3 packets), server-expiry-consumption (14) and
server-dscp-interleaved (32). Two further captures were reviewed and rejected as
redundant or unsupporting; their textual results were kept instead.

Host-specific figures are labelled as such throughout, upstream defects are not
promoted to protocol requirements, observations are separated from inferences and
from recommendations, and no implementation policy is chosen here. The client
specification gains matching refinements where the two compatibility baselines
would otherwise state a lifecycle or marking rule differently.

Documentation and evidence only; no production code changed.
2026-08-12 16:24:57 +07:00

1072 lines
47 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# IRTT Server Behavioral Vectors
**Source:** Black-box observation of an upstream IRTT **0.9.1 release** server on
macOS Darwin 25.5.0 arm64, driven by a raw UDP harness.
**Date:** 2026-08-12
**Companion to:** `../IRTT_SERVER_PROTOCOL_SPEC.md`
These vectors are stated as **input → observed output**. They describe what a
server was seen to emit for a given request sequence. They do not describe how
any implementation produces those bytes.
Unless a row says otherwise, the server under test is the unmodified upstream
0.9.1 release. Two other builds appear where they are named explicitly: the 0.9.0
release, and a build of the upstream development tree six upstream commits past
the 0.9.1 tag. Results from those builds never stand in for 0.9.1. Section 5.2.3
is a version *comparison*, where the three builds differ; elsewhere the other two
builds are named only to record that a 0.9.1 result reproduced on them unchanged
(Sections 3.2, 4.7, 8.1, 8.2).
Addresses in the accompanying captures are loopback only. Session tokens are
server-assigned random values and differ per run; where a token appears below it
is the value from that specific run and carries no meaning.
---
## 1. Received Window and Received Count
All vectors in this section were produced on a single session negotiated with
ReceivedStats = both (3), StampAt = none (0). Each row is one echo request and
the reply it produced. `count` is the 32-bit received count field; `window` is
the 64-bit received window field.
### 1.1 Sequential, no loss
| # | request seq | reply count | reply window |
|---|-------------|-------------|--------------|
| 1 | 0 | 1 | `0x0000000000000001` |
| 2 | 1 | 2 | `0x0000000000000003` |
| 3 | 2 | 3 | `0x0000000000000007` |
| 4 | 3 | 4 | `0x000000000000000f` |
| 5 | 4 | 5 | `0x000000000000001f` |
| 6 | 5 | 6 | `0x000000000000003f` |
### 1.2 One gap
| # | request seq | reply count | reply window | note |
|---|-------------|-------------|--------------|------|
| 1 | 0 | 1 | `0x0000000000000001` | |
| 2 | 1 | 2 | `0x0000000000000003` | |
| 3 | 3 | 3 | `0x000000000000000d` | bit 1 clear — sequence 2 missing |
| 4 | 4 | 4 | `0x000000000000001b` | bit 2 clear — sequence 2 missing |
### 1.3 Multiple gaps
| # | request seq | reply count | reply window |
|---|-------------|-------------|--------------|
| 1 | 0 | 1 | `0x0000000000000001` |
| 2 | 3 | 2 | `0x0000000000000009` |
| 3 | 7 | 3 | `0x0000000000000091` |
| 4 | 8 | 4 | `0x0000000000000123` |
### 1.4 Later gap fill — window collapses
| # | request seq | reply count | reply window | note |
|---|-------------|-------------|--------------|------|
| 1 | 0 | 1 | `0x0000000000000001` | |
| 2 | 1 | 2 | `0x0000000000000003` | |
| 3 | 5 | 3 | `0x0000000000000031` | gap over 2, 3, 4 |
| 4 | 3 | 4 | **`0x0000000000000001`** | filling the gap **discards** history |
A late arrival does not set the corresponding historical bit. The window is
reset to "only the current packet is known".
### 1.5 Duplicate sequence number
| # | request seq | reply count | reply window | note |
|---|-------------|-------------|--------------|------|
| 1 | 0 | 1 | `0x0000000000000001` | |
| 2 | 1 | 2 | `0x0000000000000003` | |
| 3 | 1 | 3 | `0x0000000000000003` | count advances, window unchanged |
| 4 | 2 | 4 | `0x0000000000000007` | |
### 1.6 Reordering
| # | request seq | reply count | reply window | note |
|---|-------------|-------------|--------------|------|
| 1 | 0 | 1 | `0x0000000000000001` | |
| 2 | 1 | 2 | `0x0000000000000003` | |
| 3 | 2 | 3 | `0x0000000000000007` | |
| 4 | 1 | 4 | **`0x0000000000000001`** | out-of-order arrival resets the window |
| 5 | 3 | 5 | `0x0000000000000005` | rebuilds from the reset state |
Note row 5: the window says sequence 1 was received (bit 2) and sequence 3 was
received (bit 0), but bit 1 is clear even though sequence 2 *was* received
earlier. History before the reset is unrecoverable.
### 1.7 Strictly descending sequence numbers
| # | request seq | reply count | reply window |
|---|-------------|-------------|--------------|
| 1 | 5 | 1 | `0x0000000000000001` |
| 2 | 4 | 2 | `0x0000000000000001` |
| 3 | 3 | 3 | `0x0000000000000001` |
| 4 | 2 | 4 | `0x0000000000000001` |
| 5 | 1 | 5 | `0x0000000000000001` |
| 6 | 0 | 6 | `0x0000000000000001` |
Every reply is answered; only the count carries information.
### 1.8 Gap at and beyond the representable window
| first seq | second seq | gap | second reply window |
|-----------|------------|-----|---------------------|
| 0 | 63 | 63 | `0x8000000000000001` — highest bit set |
| 0 | 64 | 64 | `0x0000000000000001` |
| 0 | 65 | 65 | `0x0000000000000001` |
| 0 | 1000 | 1000 | `0x0000000000000001` |
The window represents the current packet plus 63 predecessors. A gap of exactly
63 still records the older packet in the top bit; a gap of 64 or more discards
all history.
### 1.9 Non-zero starting sequence number
| # | request seq | reply count | reply window |
|---|-------------|-------------|--------------|
| 1 | 100 | 1 | `0x0000000000000001` |
| 2 | 101 | 2 | `0x0000000000000003` |
| 3 | 102 | 3 | `0x0000000000000007` |
The first request of a session always yields window `0x1`, whatever its
sequence number.
### 1.10 32-bit sequence wraparound
| # | request seq | reply count | reply window |
|---|-------------|-------------|--------------|
| 1 | 4294967293 | 1 | `0x0000000000000001` |
| 2 | 4294967294 | 2 | `0x0000000000000003` |
| 3 | 4294967295 | 3 | `0x0000000000000007` |
| 4 | 0 | 4 | `0x000000000000000f` |
| 5 | 1 | 5 | `0x000000000000001f` |
Wraparound is handled as ordinary modular arithmetic: crossing 2^32 − 1 → 0 is
treated as a step of one, not as a gap of 2^32 − 1 and not as reordering.
Starting a session at 4294967295 and following with 0 gives `0x1` then `0x3`.
### 1.11 Randomized cross-check
The window and count rules in `../IRTT_SERVER_PROTOCOL_SPEC.md` Section 10 were
checked against a live server over 12 sessions of 40 requests each — 480 replies
in total — with sequence numbers drawn from a mix of in-order steps, duplicates,
forward gaps of 2 to 80, and backward steps of 1 to 5, and with starting
sequence numbers of 0, 1, 7, 100 and 4294967294.
**Result: 480 replies checked, 0 mismatches** in either the window value or the
count value.
### 1.12 Count excludes dropped requests
Server configured with a minimum interval of 100 ms and a burst allowance of 5.
Twelve requests sent back to back, then three more after a 600 ms pause.
| requests sent | replies received | counts in replies |
|---------------|------------------|-------------------|
| 12 back to back | 5 | 1, 2, 3, 4, 5 |
| 3 after a pause | 3 | 6, 7, 8 |
Rate-limited requests produce no reply and do not advance the count.
---
## 2. Session Identity
Capture: `../captures/server-session-identity.pcapng`.
Session opened from source port A; token `88a76d2fd0cd5f32`.
| # | source | packet | observed |
|---|--------|--------|----------|
| 1 | A | open request | open reply, token assigned |
| 2 | A | echo seq 0 | reply, count 1, window `0x1` |
| 3 | **B** | echo seq 1, correct token | **no reply** |
| 4 | **B** | close, correct token | **no reply**, session **not** closed |
| 5 | A | echo seq 2 | reply, count 2, window `0x5` |
| 6 | **C** | echo seq 0, token `1111111111111111` | **no reply** |
| 7 | A | close | **no reply**, session removed |
Row 5 is the important one: the count advanced from 1 to 2, not to 3 — the
foreign-endpoint request in row 3 was not counted. The window `0x5` reflects
sequence 2 (bit 0) and sequence 0 (bit 2), with bit 1 clear because sequence 1
never reached the session.
Row 4 confirms that a close from a foreign endpoint does not tear down the
session.
Additional cases from the same class of experiment:
| Case | Result |
|------|--------|
| Two opens from the same source port | Two distinct tokens, both simultaneously usable |
| Same token replayed to the other address family's listener on the same port | No reply |
| Echo with an all-zero token | No reply |
| Echo with the token of an already-closed session | No reply |
| Repeated close with the same token | No reply |
| 1000 opens from one source endpoint | 1000 distinct tokens, all usable |
---
## 3. Close Lifecycle
### 3.1 Client-initiated close
Capture: `../captures/server-close-lifecycle.pcapng`. Session token
`eef1e3fb1ab2eb66`, negotiated ReceivedStats = both, StampAt = none.
| frame | direction | bytes |
|-------|-----------|-------|
| 1 | C → S | `14a75b01 01020280e0ba84bf030380a8d6b9070506` |
| 2 | S → C | `14a75b03 eef1e3fb1ab2eb66 01020280e0ba84bf030380a8d6b9070506` |
| 3 | C → S | `14a75b00 eef1e3fb1ab2eb66 00000000 00000000 0000000000000000` |
| 4 | S → C | `14a75b02 eef1e3fb1ab2eb66 00000000 01000000 0100000000000000` |
| 5 | C → S | `14a75b00 eef1e3fb1ab2eb66 01000000 00000000 0000000000000000` |
| 6 | S → C | `14a75b02 eef1e3fb1ab2eb66 01000000 02000000 0300000000000000` |
| 7 | C → S | `14a75b00 eef1e3fb1ab2eb66 02000000 00000000 0000000000000000` |
| 8 | S → C | `14a75b02 eef1e3fb1ab2eb66 02000000 03000000 0700000000000000` |
| 9 | C → S | `14a75b04 eef1e3fb1ab2eb66` — close request |
| 10 | C → S | `14a75b04 eef1e3fb1ab2eb66` — repeated close |
| 11 | C → S | `14a75b00 eef1e3fb1ab2eb66 09000000 …` — echo after close |
Frames 9, 10 and 11 receive **no response**. Frame 9 removes the session; 10 and
11 are dropped as unknown-token packets. The capture ends with three unanswered
client packets, which is the complete and correct close exchange for
protocol version 1.
Close request layout: magic (3) + flags `0x04` (1) + token (8) = 12 bytes. With
authentication: magic (3) + flags `0x0c` (1) + MAC (16) + token (8) = 28 bytes.
### 3.2 Server-initiated close
Capture: `../captures/server-close.pcapng`. Server configured with a maximum
test duration of 2 s; client requested 600 s and was restricted to 2 s. Requests
sent every ~250 ms.
| frame | direction | bytes (abridged) | note |
|-------|-----------|------------------|------|
| 2 | S → C | `14a75b03 f0592d9fb129558c 010202 80d0acf30e 03…` | duration restricted to 2 s |
| 34 | S → C | `14a75b02 … 0f000000 10000000 ffff000000000000` | ordinary reply, seq 15 |
| 35 | C → S | `14a75b00 … 10000000 …` | echo seq 16 |
| **36** | S → C | `14a75b06 f0592d9fb129558c 10000000 11000000 ffff010000000000` | **flags `0x06` = Reply\|Close** |
| 37 | C → S | `14a75b00 … 63000000 …` | echo seq 99 — **no reply** |
Frame 36 is a complete, ordinary echo reply — correct sequence number (16),
correct token, count 17, window `0x1ffff` — with the Close flag additionally
set. The session is gone from that moment; frame 37 is unanswered.
Timing measurements of the deadline, from the **first** echo request of the
session:
| configured maximum duration | close flag observed at |
|-----------------------------|------------------------|
| 1 s | 3.01 s |
| 2 s | 4.06 s |
| 2 s (second run) | 4.10 s |
The deadline is the configured maximum duration plus a 2-second grace period.
Boundary sweep, probes spaced 50 ms, offsets measured from the first **served**
echo of the session:
| configured maximum duration | last offset answered normally | first offset carrying Close |
|-----------------------------|-------------------------------|-----------------------------|
| 500 ms | 2.45 s | 2.50 s |
| 1 s | 2.95 s | 3.00 s |
| 3 s | 4.95 s | 5.00 s |
The 2-second margin is additive across the configured maximum, not proportional
to it. Reproduced on the 0.9.0 release, the 0.9.1 release and the tested
post-0.9.1 development build.
What starts and what carries the deadline:
| case | result |
|------|--------|
| Session opened 5 s before its first echo | deadline unchanged — the open does not start it |
| First request oversized (dropped by the maximum-length policy) | clock **not** started; a later served echo starts it |
| First request from a foreign source endpoint (dropped) | clock **not** started; a later served echo starts it |
| Echo that crosses the deadline | full normal reply with Close set; **counted** in the received count and window it reports |
| Echo that crosses the deadline but is itself rate-limited | dropped, no reply; the **next served** echo carries the Close flag |
| Client's next echo after the close-flagged reply | no reply — token released |
| Client's close request after the close-flagged reply | no reply — token released |
Two drop classes were tested as the session's first request — an oversized
request and one from a foreign source endpoint — and neither started the
deadline; a later served echo became the origin instead. The other drop classes
of Section 9 were not tested in that position, and this vector makes no claim
about them. The rate-limit row above concerns a request that crosses an
already-running deadline, not one that would start it.
### 3.3 Observed upstream client reaction to a close-flagged reply
Driving an upstream 0.9.1 client against a server that sets the Close flag from
sequence 2 onward:
```
seq=0 recorded
seq=1 recorded
seq=2 reply carries Close -> run terminates
```
The client reports a "server closed connection" condition, prints the statistics
for sequences 0 and 1 only — the close-flagged reply is **not** recorded — and
exits with a success status.
---
## 4. Open Negotiation
### 4.1 Protocol version is not rejected
Server default configuration. Each row is an open request carrying only the
listed ProtocolVersion value.
| requested ProtocolVersion | server response | reply parameter payload |
|---------------------------|-----------------|-------------------------|
| 1 | open reply, session created | `0102` (version 1) |
| 0 | open reply, session created | `0102` (version 1) |
| 2 | open reply, session created | `0102` (version 1) |
| −1 | open reply, session created | `0102` (version 1) |
| tag absent entirely | open reply, session created | `0102` (version 1) |
In every case the reply flags were `0x03` (Open\|Reply) with the Close flag
**clear** and a non-zero token. Reply length 14 bytes: magic (3) + flags (1) +
token (8) + `0102`.
### 4.2 Parameter payload acceptance
| open request parameter payload | response |
|-------------------------------|----------|
| empty | open reply, 14 bytes |
| tag 2 only, no value bytes | no reply |
| tag 2 with an incomplete multi-byte varint | no reply |
| version 1 + duration 0 | no reply |
| version 1 + duration −1 | no reply |
| version 1 + interval −5 | no reply |
| version 1 + ReceivedStats 4 | no reply |
| version 1 + ReceivedStats −1 | no reply |
| version 1 + StampAt 5 | no reply |
| version 1 + StampAt 4 + Clock 3 | open reply |
| version 1 + Clock 0 | no reply |
| version 1 + Clock 4 | no reply |
| version 1 + unknown tag 42 | open reply, tag ignored |
| version 1 + unknown tag 200 | open reply, tag ignored |
| version 1 + 80 repetitions of unknown tag 42 (~200 bytes) | open reply, all ignored |
| version 1 + ServerFill declared 40 bytes | no reply |
| version 1 + ServerFill declaring 10 bytes with only 2 present | no reply |
| 50 bytes of arbitrary data | no reply |
### 4.3 No-test open
| direction | bytes |
|-----------|-------|
| C → S | `14a75b05` + parameter payload — flags Open\|Close |
| S → C | `14a75b07 0000000000000000` + restricted parameters — flags Open\|Reply\|Close, **zero token** |
With authentication the reply flags are `0x0f` and the reply carries a valid MAC.
The zero token is not usable: subsequent echo and close requests bearing it get
no reply.
### 4.4 Interval restriction against the idle timeout
Client requests an interval of one hour; server has no configured minimum
interval.
| server idle timeout | negotiated interval |
|---------------------|---------------------|
| 4 s | 1 s |
| 8 s | 2 s |
| 20 s | 5 s |
| 40 s | 10 s |
| 60 s | 15 s |
Client-side floor, measured with an upstream 0.9.1 client requesting a 1 s
interval:
| server idle timeout | server-returned interval | client outcome |
|---------------------|--------------------------|----------------|
| 2 s | 500 ms | aborts — reduction below 1 s, in strict **and** loose mode |
| 3 s | 750 ms | aborts — reduction below 1 s, in strict **and** loose mode |
| 4 s | 1 s (no reduction) | proceeds |
Requesting a 2 s interval against a 4 s idle timeout produces a reduction to
exactly 1 s: rejected in strict mode as an ordinary restriction, accepted in
loose mode.
Boundary rows with a configured **minimum** interval as well. The requested
interval is raised to the minimum first and capped to (idle timeout ÷ 4)
afterwards, so the returned value can end up below the configured minimum:
| server minimum interval | server idle timeout | requested | negotiated |
|-------------------------|---------------------|-----------|------------|
| 100 ms | 1 min | 10 ms | 100 ms — raised to the minimum |
| 100 ms | 1 min | 100 ms | 100 ms — unchanged |
| 100 ms | 1 min | 60 s | 15 s — capped at timeout ÷ 4 |
| **5 s** | **4 s** | 10 ms | **1 s** — the cap wins, below the configured minimum |
| 5 s | 0 (disabled) | 10 ms | 5 s — no cap applies |
| 0 | 4 ns | 10 ms | 1 ns |
| 0 | 1 ns | 10 ms | **absent from the reply** — the cap is 0, and a restricted value of zero is omitted |
### 4.5 Timestamp allowance
Requested StampAt → negotiated StampAt, by server timestamp allowance:
| requested | dual | single | none |
|-----------|------|--------|------|
| 0 (none) | 0 | 0 | 0 |
| 1 (send) | 1 | 1 | 0 |
| 2 (receive) | 2 | 2 | 0 |
| 3 (both) | 3 | **4** | 0 |
| 4 (midpoint) | 4 | 4 | 0 |
### 4.6 Repeated occurrences of a known tag
One open request per row, carrying the listed occurrences of a single tag.
| parameter payload | result |
|-------------------|--------|
| Duration 1 s, then Duration 2 s | open reply, **Duration 2 s** |
| Duration 2 s, then Duration 1 s | open reply, **Duration 1 s** |
| Clock 1, then Clock 3 | open reply, **Clock 3** |
| Clock 3, then Clock 4 (out of range) | **no reply** |
| Duration 1 s, then Duration 0 (invalid) | **no reply** |
| Duration 0 (invalid), then Duration 1 s | **no reply** |
| ServerFill `rand`, then a 33-character string (invalid) | **no reply** |
Among valid duplicates, the **last** occurrence wins for every known tag tested:
ProtocolVersion, Duration, Interval, Length, ReceivedStats, StampAt, Clock, DSCP
and ServerFill. Duration was additionally tested with an invalid occurrence in
both orders, and both requests were dropped. Clock and ServerFill were tested
with an invalid second occurrence, which was also dropped. The untested invalid
orders and parameters are not generalized here.
### 4.7 Absent Clock with a non-none restricted StampAt — upstream-defect vector
Capture: `../captures/server-clock-absent.pcapng`. Default-configuration server.
This vector records an **upstream robustness defect** (server specification
Section 22.5) when timestamp restriction leaves the requested non-none StampAt
non-none. It is a must-not-crash recommendation for a clean implementation, not
a behavior to reproduce.
| frame | direction | bytes | note |
|-------|-----------|-------|------|
| 1 | C → S | `14a75b01 05 06 06 06 04 00` | open; ReceivedStats = 3, StampAt = 3 (both), Length = 0, **no Clock tag** |
| 2 | S → C | `14a75b03 7ca44127b2cd7eab 01 02 05 06 06 06` | open reply, non-zero token, ProtocolVersion 1, ReceivedStats 3, StampAt 3 — **no Clock parameter** |
| 3 | C → S | `14a75b00 7ca44127b2cd7eab 00000000` | first echo, sequence 0 |
Frame 3 is the last packet in the capture. It receives no reply, and the server
process terminates; every other session on that process, on either address
family, stops being served at the same moment.
| variation | result |
|-----------|--------|
| Requested StampAt 1 (send), no Clock; restricted StampAt non-none | open accepted, first echo fatal |
| Requested StampAt 2 (receive), no Clock; restricted StampAt non-none | open accepted, first echo fatal |
| Requested StampAt 3 (both), no Clock; restricted StampAt non-none | open accepted, first echo fatal |
| Requested StampAt 4 (midpoint), no Clock; restricted StampAt non-none | open accepted, first echo fatal |
| Requested StampAt 0 (none), no Clock | open accepted, session serves normally with no timestamps |
| **StampAt 3, explicit `Clock = 0`** | **open dropped, no reply, no session** — see Section 4.2 |
| Requested StampAt 1 / 2 / 3 / 4, no Clock; no-timestamp policy restricts StampAt to none | open accepted, session serves normally with no timestamps |
| Requested StampAt 1 / 2 / 3 / 4, no Clock; single-timestamp policy leaves restricted StampAt non-none | open accepted, first echo fatal |
The last two rows are scoped to requested non-none, absent-Clock cases only:
fatality depends on the server's restricted (effective) StampAt remaining
non-none. The `StampAt 0` row is served normally whatever the server's timestamp
policy, and the explicit `Clock = 0` row is rejected during negotiation before
any policy applies; neither becomes fatal under either configuration.
Reproduced on the 0.9.0 release, the 0.9.1 release and the tested post-0.9.1
development build.
The last four rows are the point of the vector: an omitted Clock and an explicit
`Clock = 0` are different inputs with opposite upstream outcomes.
---
## 5. Reply Length
### 5.1 Length as a function of negotiated fields
Reply lengths, unauthenticated, measured across every combination. `S` is
ReceivedStats, `A` is StampAt, `C` is Clock.
| S | A | C | reply length |
|---|---|---|--------------|
| 0 | 0 | any | 16 |
| 1 | 0 | any | 20 |
| 2 | 0 | any | 24 |
| 3 | 0 | any | 28 |
| 3 | 1 or 2 | 1 or 2 | 36 |
| 3 | 1 or 2 | 3 | 44 |
| 3 | 3 | 1 or 2 | 44 |
| 3 | 3 | 3 | 60 |
| 3 | 4 | 1 or 2 | **44** — see below |
| 3 | 4 | 3 | 44 |
Add 16 bytes to every figure when authentication is in use.
### 5.2 Dual-field midpoint wire representation
For StampAt = 4 (midpoint), upstream 0.9.1 emits **two** 8-byte timestamp fields
— the midpoint wall field followed by the midpoint monotonic field, in that order
— for every negotiated Clock, occupying a fixed 16-byte region. With a single
negotiated clock this is one field more than the negotiated parameters imply.
These rows record bytes observed on the wire and nothing else. All vectors below
at negotiated length 0.
| S | A | C | expected from negotiation | observed |
|---|---|---|---------------------------|----------|
| 0 | 4 | 1 | 24 | **32** |
| 0 | 4 | 2 | 24 | **32** |
| 0 | 4 | 3 | 32 | 32 |
| 1 | 4 | 1 | 28 | **36** |
| 1 | 4 | 2 | 28 | **36** |
| 2 | 4 | 1 | 32 | **40** |
| 2 | 4 | 2 | 32 | **40** |
| 3 | 4 | 1 | 36 | **44** |
| 3 | 4 | 2 | 36 | **44** |
| 3 | 4 | 3 | 44 | 44 |
Raw reply for S=0, A=4, C=1 (wall only), 32 bytes:
```
14 a7 5b 02 <token 8> 00 00 00 00
a4 c1 74 90 47 83 ca 18 <- midpoint wall, 1786384545595310500
da 45 a2 3b 00 00 00 00 <- midpoint monotonic, 1000490458
```
The second field was not negotiated. An upstream 0.9.1 client run in this
configuration reports "packet length: 36 bytes" while receiving 44-byte
datagrams, and completes normally.
No other StampAt value deviates. Measured at negotiated length 0, S=3: `A=1` and
`A=2` give 36 bytes for C=1 or C=2 and 44 for C=3; `A=3` gives 44 for C=1 or C=2
and 60 for C=3 — all exactly as the negotiated layout implies.
### 5.2.1 The excess is bounded by the negotiated length
The extra field enlarges the field block, not every reply. Reply length remains
the larger of the negotiated length and the field block (Section 5.3):
```
normal_header = negotiated field block
upstream_header = normal_header + one 8-byte timestamp field
compatible_reply_len = max(negotiated_length, normal_header)
upstream_0_9_1_reply_len = max(negotiated_length, upstream_header)
```
Sweep for S=3, A=4, C=1 — `normal_header` 36, `upstream_header` 44:
| negotiated length | 0 | 16 | 32 | 36 | 37 | 40 | 43 | 44 | 45 | 48 | 64 | 128 | 1024 | 4096 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| reply datagram | 44 | 44 | 44 | 44 | 44 | 44 | 44 | 44 | 45 | 48 | 64 | 128 | 1024 | 4096 |
| excess | +8 | +8 | +8 | +8 | +7 | +4 | +1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
Same pattern for the other received-stats settings, with the two minima at 24/32
(S=0), 28/36 (S=1) and 32/40 (S=2). The C=3 control case shows zero excess at
every negotiated length.
At negotiated length 4096 the midpoint region still holds both fields, followed
by fill — the extra field displaces payload rather than extending the datagram.
The excess is therefore **+8**, then **+7…+1**, then **0**, depending on the
negotiated length. There is no negotiated length at which the reply is
universally "negotiated length + 8".
Read that row across columns, not within a column. Each column is a separate
negotiation whose upstream reply has exactly one length,
`upstream_0_9_1_reply_len`. The +8 / +7…+1 / 0 figures are the values the
difference takes across different negotiations; no single negotiation produces a
range of lengths, and nothing here says an intermediate length between
`compatible_reply_len` and `upstream_0_9_1_reply_len` was ever emitted or should
be accepted.
**Consequence for decoding.** In the zero-excess regime
(`upstream_0_9_1_reply_len == compatible_reply_len`) the upstream form
`[wall][mono][payload…]` and a conforming single-clock form `[mono][payload…]`
produce datagrams of identical length, and the vectors above provide no way to
tell them apart. That ambiguity is recorded, not resolved.
### 5.2.2 Reached without requesting midpoint
Server restricted to a single timestamp, S=3, negotiated length 0:
| requested A/C | negotiated A/C | expected from negotiation | observed |
|---------------|----------------|---------------------------|----------|
| 3 / 1 | 4 / 1 | 36 | **44** |
| 3 / 2 | 4 / 2 | 36 | **44** |
| 3 / 3 | 4 / 3 | 44 | 44 |
| 4 / 1 | 4 / 1 | 36 | **44** |
### 5.2.3 Version comparison
Negotiated length 0, S=3:
| build | A=4, C=1 | A=4, C=2 | A=4, C=3 |
|-------|----------|----------|----------|
| 0.9.0 release | 36, one field | 36, one field (process-relative value) | 44, two fields |
| 0.9.1 release | **44, two fields** | **44, two fields** | 44, two fields |
| tested post-0.9.1 tree (six upstream commits past the 0.9.1 tag) | **44, two fields** | **44, two fields** | 44, two fields |
The 0.9.0 release emits exactly the negotiated fields; 0.9.1 emits the dual-field
form; the tested post-0.9.1 tree behaves like 0.9.1. The six post-0.9.1 commits
are post-release work and are not part of the 0.9.1 release.
A contaminated-side server emitting **only** the negotiated midpoint field was
driven by an upstream 0.9.1 client for wall-only, monotonic-only and dual-clock
midpoint configurations, and the client completed every run cleanly. This is
contaminated-side consistency validation; the black-box part of it is the
client's acceptance of the conforming form.
### 5.3 Negotiated length versus actual reply length
Server bound to an interface with a 1500-byte MTU, ReceivedStats = none,
StampAt = none (16-byte field block).
| requested length | negotiated length returned | reply datagram |
|------------------|----------------------------|----------------|
| 0 | 0 | 16 |
| 10 | 10 | 16 |
| 16 | 16 | 16 |
| 17 | 17 | 17 |
| 1000 | 1000 | 1000 |
| 1400 | 1400 | 1400 |
| 1500 | 1500 | 1500 |
| 1501 | 1501 | **1500** |
| 2000 | 2000 | **1500** |
| 3000 | 3000 | **1500** |
| 8000 | 8000 | **1500** |
The negotiated value returned to the client is not clamped; the datagram is.
A session negotiating a length of 0 or 20 with full statistics and dual
timestamps on both clocks produced 60-byte replies — the field block wins when
it is larger than the negotiated length.
### 5.4 Request length versus reply length
| negotiated length | request datagram | reply datagram |
|-------------------|------------------|----------------|
| 16 | 216 (200 trailing bytes) | 16 |
| 64 | 16 | 64 |
| 64 | 32 | 64 |
| 64 | 64 | 64 |
The reply length depends only on the negotiation, never on the request.
### 5.5 Maximum request length policy
Server configured with a maximum packet length of 64; client requested 200 and
was restricted to 64.
| request datagram | result |
|------------------|--------|
| 16 | reply, 64 bytes |
| 32 | reply, 64 bytes |
| 64 | reply, 64 bytes |
| 65 | **no reply** |
| 100 | **no reply** |
| open request larger than 64 | **accepted**, open reply sent |
Server configured with a maximum packet length of 10 (below the minimum field
block): the session opens and negotiates a length of 10, and every 16-byte echo
request is dropped.
---
## 6. Server Fill
### 6.1 Default fill bytes and pattern phase
Default-configuration server, ReceivedStats = none, StampAt = none, so the
payload begins at offset 16.
| negotiated length | reply payload |
|-------------------|---------------|
| 17 | `69` |
| 20 | `72 74 74 69` |
| 24 | `72 74 74 69 72 74 74 69` |
| 48 | `72 74 74 69` repeated 8 times |
Four consecutive replies on one session with a 7-byte payload:
```
seq 0: 72 74 74 69 72 74 74
seq 1: 69 72 74 74 69 72 74
seq 2: 74 69 72 74 74 69 72
seq 3: 74 74 69 72 74 74 69
```
The four-byte pattern `69 72 74 74` is emitted as a continuous stream; its phase
is not reset per packet, and it carries over between sessions on the same
listener.
### 6.2 Fill descriptor negotiation
Default allow-list (random fills only), negotiated length 32 so the payload is
16 bytes:
| requested descriptor | negotiated descriptor returned | payload |
|----------------------|-------------------------------|---------|
| `rand` | `rand` | random, differs per packet |
| `none` | `pattern:69727474` | `72747469…` |
| `pattern:aabb` | `pattern:69727474` | `72747469…` |
| `pattern:69727474` | `pattern:69727474` | `72747469…` |
| `bogus` | `pattern:69727474` | `72747469…` |
| 32-character string | `pattern:69727474` | `72747469…` |
| 33-character string | — | **open dropped** |
Permissive allow-list:
| requested descriptor | negotiated descriptor returned | payload |
|----------------------|-------------------------------|---------|
| `rand` | `rand` | random |
| `pattern:aabb` | `pattern:aabb` | `aabbaabbaabbaabb…` |
| `pattern:00` | `pattern:00` | `0000000000000000…` |
| `pattern:ff00` | `pattern:ff00` | `ff00ff00ff00ff00…` |
| `pattern:zz` | `pattern:69727474` | `69727474…` (invalid hex, falls back) |
| `none` | `none` | **unspecified residual bytes** |
| `pattern:` | — | **server terminated** |
Empty allow-list: every requested descriptor, including `rand`, is answered with
`pattern:69727474`.
### 6.3 The refused descriptor does not describe the payload
Two servers with different configured fills, default allow-list (`rand` only),
negotiated length 32 so the payload is 16 bytes:
| Server fill | Requested descriptor | Negotiated descriptor returned | Payload |
|-------------|----------------------|-------------------------------|---------|
| random | none | absent | `25ae387a787d641d82eb514f2bfca15f` (random) |
| random | `pattern:aabb` | `pattern:69727474` | `29ce866b6d192c74376e7161dd71975d` (random) |
| random | `rand` | `rand` | random |
| `pattern:abcd` | none | absent | `abcdabcdabcdabcdabcdabcdabcdabcd` |
| `pattern:abcd` | `pattern:aabb` | `pattern:69727474` | `abcdabcdabcdabcdabcdabcdabcdabcd` |
| `pattern:abcd` | `rand` | `rand` | random |
On refusal, the descriptor returned to the client is a **fixed default string**,
not a description of the bytes the server actually sends. A client must not
predict payload content from it.
### 6.4 No-fill payload content
Server configured with no fill and a permissive allow-list, negotiated length 32
(16-byte payload):
| request payload | reply payload |
|-----------------|---------------|
| `000102…0f` (16 bytes) | `000102…0f` — the request's own bytes |
| none (16-byte request) | `000102…0f` — **residue from the previous packet** |
On a `none` fill negotiated through the descriptor, one observed 16-byte payload
was `c0cbacf6220380897a044009 046e6f6e`, whose trailing bytes are a fragment of
the preceding open reply's parameter payload. Payload content under no-fill is
unspecified and may contain data from unrelated traffic.
---
## 7. Authentication
Server configured with key `correctkey`.
| request | result |
|---------|--------|
| Open, flags `0x09`, valid MAC | Open reply, flags `0x0b`, valid MAC, 43 bytes |
| Echo, flags `0x08`, valid MAC | Echo reply, flags `0x0a`, valid MAC, 44 bytes |
| Close, flags `0x0c`, valid MAC | Session removed, **no reply** |
| No-test open, flags `0x0d`, valid MAC | Reply flags `0x0f`, zero token, valid MAC |
| Open with no HMAC flag and no MAC field | no reply |
| Echo with no HMAC flag and no MAC field | no reply |
| Close with no HMAC flag and no MAC field | no reply, **session survives** |
| Open with MAC computed under a different key | no reply |
| Echo with MAC computed under a different key | no reply |
| Echo with one bit flipped in the MAC | no reply |
| Echo with the MAC field all zeros | no reply |
| Echo with the MAC field truncated to 8 bytes | no reply |
| 19-byte datagram (too short for the MAC field) | no reply |
| 20-byte datagram, flags `0x08`, valid MAC, nothing else | no reply |
| Valid MAC but the HMAC flag cleared in flags | no reply |
| MAC recomputed with the flag cleared, flag cleared | no reply |
Against a server with **no** key, any request with the HMAC flag set gets no
reply.
**Session integrity across failures.** After the eight failing cases above were
sent to a live session, the next correctly authenticated echo was served
normally and the received count had advanced only for the accepted packets.
**Reply authentication is mandatory.** A contaminated-side server that
authenticated its open reply correctly but omitted the HMAC flag from echo
replies caused an upstream 0.9.1 client to discard every echo reply and terminate
abnormally with zero packets received. The observation that matters is the
*client's* reaction, which is black-box; the server was only the stimulus.
---
## 8. Idle Expiry
Server configured with a 2-second idle timeout. Each trial: open, one echo to
start the idle clock, wait, then two echoes back to back.
| gap after the last accepted echo | first request after the gap | the request after that |
|---|---|---|
| 5.0 s | answered | answered |
| 6.5 s | answered | answered |
| 6.9 s | answered | answered |
| 7.1 s | answered | **dropped** |
| 7.5 s | answered | **dropped** |
| 9.0 s | answered | **dropped** |
Observed session-release boundary = idle timeout + 5 s. The first
otherwise-serviceable request past that boundary is still answered once by
upstream, and the immediate follow-up is dropped. Section 8.3 shows what happens
when a packet that would be dropped anyway touches the token first.
**A session that has never carried an echo request does not expire.** With the
same 2-second timeout, a session left completely idle for 9 seconds after open
was served normally on its first echo request.
With the idle timeout disabled, a session idle for 9 seconds was served normally
and remained usable.
### 8.1 The grace is additive across configured timeouts
Session-release boundary sweep, probes spaced 50 ms, three repetitions per row,
gaps measured from the last accepted echo. Each probe used a first
otherwise-serviceable echo after the gap and an immediate follow-up; the boundary
is inferred from whether that follow-up was dropped:
| configured idle timeout | longest gap with follow-up served | shortest gap with follow-up dropped |
|-------------------------|----------------------------------|------------------------------------|
| 500 ms | 5.45 s | 5.50 s |
| 2 s | 6.95 s | 7.00 s |
| 4 s | 8.95 s | 9.00 s |
Every row sits at timeout + 5 s to within the probe spacing. At and beyond the
observed release boundary, the first otherwise-serviceable post-gap echo may
still receive a final lazy-release reply; the immediate follow-up is then
dropped. The margin is the same five seconds at each timeout, so it is additive
rather than proportional, and the boundary did not move with when the session
was opened. Reproduced on the 0.9.0 release, the 0.9.1 release and the tested
post-0.9.1 development build.
### 8.2 Which drop classes keep a session alive
Per row: open a session, send one echo (count 1), inject the listed packet, then
send another echo. The second echo's count shows whether the injected packet was
counted; separate timing trials show whether it moved the expiry boundary.
| injected packet | counted / window advanced | extends the idle lifetime |
|-----------------|---------------------------|---------------------------|
| bad magic | no | no |
| invalid flag bits | no | no |
| Reply or Open flag on a data packet | no | no |
| unknown token, or a zero token | no | no |
| valid token from a foreign source endpoint | no | no — but see 8.3 |
| echo truncated before the sequence number | no | no |
| request over the configured maximum length | no | no |
| bad, missing or zeroed MAC | no | no |
| **request with no rate allowance left** | **no** | **yes** |
The rate-limit row was separated from the alternatives three ways: a session fed
only too-fast requests outlived its idle deadline; the same cadence of oversized
requests did not; and a silent session expired on schedule. Reproduced on all
three builds. It is the only tested drop class that keeps a session alive.
### 8.3 The first packet to release an expired session determines whether a final reply is emitted
Capture: `../captures/server-expiry-consumption.pcapng`. Server idle timeout 3 s,
so the effective boundary is 8 s after the last accepted echo. Both trials are in
the one capture, which is why it is worth keeping: the control and the test differ
by a single injected packet.
Control — session on port 49865, token `fff56ec42eb8caaa`:
| frame | t | direction | packet | observed |
|-------|---|-----------|--------|----------|
| 3 | 0.00 s | C → S | echo seq 0 | reply, count 1 |
| 5 | 8.00 s | C → S | echo seq 1 — first past the deadline | **reply**, count 2 |
| 7 | 8.00 s | C → S | echo seq 2 | **no reply** — session released |
Test — session on port 53237, token `9e27590dbb016eb9`, opened at 8.70 s:
| frame | t | direction | packet | observed |
|-------|---|-----------|--------|----------|
| 10 | 8.70 s | C → S | echo seq 0 | reply, count 1 |
| 12 | 16.71 s | **X → S** | echo seq 9, correct token, **foreign source port 64688** | no reply — foreign endpoint, as at any time |
| 13 | 17.02 s | C → S | echo seq 1 — the client's first past the deadline | **no reply** |
| 14 | 17.72 s | C → S | echo seq 2 | no reply |
Frame 13 is the result. In the control the equivalent request was answered; here
the foreign-endpoint packet at frame 12 arrived 0.3 s earlier, just past the same
deadline, and the session was already gone. The foreign packet was itself dropped
and released the session without receiving a reply, so no later request received a
final reply. Whether it advanced the received count first cannot be read from this
trial — the session emitted no further reply, so no statistic reports it. The
not-counted result of Section 2 was measured on a live session, where a later
reply exposed the count, and does not carry over to this path.
The same effect was produced by a truncated echo, an oversized echo, a close
request from a foreign endpoint, and a burst of unrelated ordinary opens arriving
before the legitimate client's post-deadline request. These are the classes that
were tested; the effect is not claimed for every possible packet.
| injected before the client's post-deadline request | client's post-deadline request |
|----------------------------------------------------|--------------------------------|
| nothing (control) | **answered**, then the next one dropped |
| echo from a foreign source endpoint | **unanswered** |
| truncated echo | **unanswered** |
| oversized echo | **unanswered** |
| close from a foreign source endpoint | **unanswered** |
| burst of unrelated ordinary opens | **unanswered** |
| burst of unrelated **no-test** opens | **answered** — no-test opens create no session and reclaim none |
---
## 9. Malformed Packet Admission
Session established; probes sent on the same socket. Prefix used:
`14a75b00` + token + `00000000`.
| probe | result |
|-------|--------|
| 0–3 byte datagram | no reply |
| 4–11 byte datagram (flags `0x00`) | no reply |
| 12–15 byte datagram (flags `0x00`) | no reply |
| 16-byte datagram (flags `0x00`) | **reply, 28 bytes** |
| magic `15a75b` | no reply |
| magic `000000` | no reply |
| flags `0x10`, `0x20`, `0x40`, `0x80`, `0xf0`, `0xff`, `0x1f` | no reply |
| flags `0x02`, `0x03`, `0x06`, `0x07`, `0x0a` (Reply set) | no reply |
| flags `0x09` (Open\|HMAC) to a non-authenticating server | no reply |
| flags `0x01` (Open) | open reply, new session |
| flags `0x05` (Open\|Close) | open reply, zero token |
| echo-shaped datagram with flags `0x01` | treated as an open; the token bytes are parsed as parameters |
| close with 20 trailing bytes | no reply, session removed |
A 12-byte datagram with flags `0x04` is a valid close request; a 12-byte
datagram with flags `0x00` is too short to be an echo request and is dropped.
The Open flag decides *interpretation*, not admission. For an otherwise
admissible datagram it wins over Close (`0x05` is the no-test open form) and over
an echo-shaped body (the token/sequence bytes are read as Open parameter data).
It does not rescue a datagram from an independent rejection: `0x03` (Open|Reply)
is dropped for the Reply flag, `0x09` (Open|HMAC) to a non-authenticating server
is dropped for the authentication mismatch, `0x1f` is dropped for the undefined
flag bits, and an Open whose parameter payload is malformed or out of range is
dropped as well (Section 4.2).
---
## 10. DSCP Negotiation and Application
The values below are **raw IP TOS / Traffic Class byte** values, which is what
the wire parameter carries — not 6-bit codepoints. Expedited Forwarding is
therefore 184 (0xb8) in this table, not 46.
| requested DSCP | negotiated value returned | echo replies |
|----------------|---------------------------|--------------|
| 0 | absent (0) | delivered |
| 46 | 46 | delivered |
| 184 | 184 | delivered |
| 255 | 255 | delivered |
| 256 | 256 | **no ECHO reply observed** |
| 300 | 300 | **no ECHO reply observed** |
| −5 | −5 | delivered |
With DSCP disallowed by server policy, every requested value is returned as
absent (0) and replies are delivered normally.
An out-of-range value is still accepted during negotiation; for values of 256 or
above the session opens successfully but no ECHO reply was observed. Only that
session is affected — the server kept serving its other sessions throughout.
### 10.1 Interleaved sessions do not leak marks
Capture: `../captures/server-dscp-interleaved.pcapng`. Four sessions opened
back to back on one listener, then driven in three interleaved rounds of one echo
each. The TOS byte column is the value read from the reply's IP header.
| session (source port) | requested DSCP | open reply TOS | echo reply TOS, rounds 1–3 |
|-----------------------|----------------|----------------|-----------------------------|
| 62913 | 46 | **0x00** | 0x2e, 0x2e, 0x2e |
| 52559 | 8 | **0x00** | 0x08, 0x08, 0x08 |
| 57975 | not requested | **0x00** | 0x00, 0x00, 0x00 |
| 64688 | 184 | **0x00** | 0xb8, 0xb8, 0xb8 |
For each session in this capture, whose negotiated value is in `0..=255`, every
echo reply carries its own session's value verbatim; no reply carried another
session's value in any round. All four open replies are unmarked.
Note what this capture does **not** show: its four open exchanges are frames 1–8
and its first marked echo reply is frame 10, so no open reply here follows a
marked reply. For that ordering see Section 10.2.
### 10.2 Marking of the other packet kinds
| packet | marking |
|--------|---------|
| open reply | always TOS 0, whatever the session negotiated |
| echo reply | the session's negotiated value, verbatim for values in `0..=255` (see Section 10.3 for other values) |
| server-initiated close reply (Section 3.2) | measured to carry the same session marking for values in `0..=255`; no capture in this set shows it — the close-flagged reply in `../captures/server-close.pcapng` is from a session that negotiated no DSCP, and is TOS 0 |
| client-initiated close | no reply is sent at all |
An open reply is unmarked even on a listener that has already sent marked
replies. From `../captures/dscp-values.pcapng`, one listener serving two
sessions in sequence:
| frame | packet | TOS |
|-------|--------|-----|
| 3 | echo request, session 1 (DSCP 8) | `0x08` |
| 4 | echo reply, session 1 | `0x08` |
| 5 | close, session 1 | `0x00` |
| 6 | open request, session 2 | `0x00` |
| **7** | **open reply, session 2** | **`0x00`** |
| 8 | echo request, session 2 (DSCP 32) | `0x20` |
| 9 | echo reply, session 2 | `0x20` |
Frame 7 is the point: it follows the marked reply of frame 4 on the same
listener and is still unmarked.
### 10.3 Observed handling of negative and out-of-range DSCP values
| requested DSCP | address family | observed |
|----------------|----------------|----------|
| −1 | IPv4 | wire TOS **255** — the only negative value whose emitted marking was recorded; the transformation is not identified |
| −1 | IPv6 | traffic class **0** |
| 256 and above | either | negotiated and echoed back; no ECHO reply observed for that session |
The v4/v6 difference was observed on the tested host, not established as a wire
rule, and a compatible server is under no obligation to reproduce it.
---
## 11. Captures
| File | Contents |
|------|----------|
| `../captures/server-recv-window.pcapng` | One session exercising sequential, gap, duplicate, reorder and far-gap sequence numbers |
| `../captures/server-close-lifecycle.pcapng` | Client-initiated close, repeated close, and an echo after close — none answered |
| `../captures/server-close.pcapng` | Server-initiated close via the maximum-duration limit; frame 36 carries flags `0x06` |
| `../captures/server-session-identity.pcapng` | Foreign-source-port echo and close, unknown token, and the original endpoint continuing to be served |
| `../captures/server-clock-absent.pcapng` | An open selecting timestamps but omitting the Clock tag is answered with a token and no Clock parameter; the first echo is the last packet in the exchange (Section 4.7) |
| `../captures/server-expiry-consumption.pcapng` | Control versus foreign-endpoint-first: whether the packet that releases an expired session emits a final reply (Section 8.3) |
| `../captures/server-dscp-interleaved.pcapng` | Four interleaved sessions with distinct DSCP values, three rounds each, no cross-session leakage, unmarked open replies (Section 10.1) |
All captures are loopback traffic with the server on a fixed port and the client
on an ephemeral port.
**Capture container metadata.** Every `.pcapng` under `../captures/` was reviewed
and its container rewritten so that it carries no capture comment, no
section/interface description, no host, user or capture-machine identification,
no capture filter string, and no filesystem path — only the packet records and
the rewriting tool's own version string. Packet bytes and timestamps were **not**
altered: for each file, the full frame hexdump and the per-frame epoch timestamps
were verified byte-identical before and after the rewrite.
The three captures added on 2026-08-12 were rewritten and verified the same way,
and their packet counts are 3, 14 and 32 respectively, unchanged from the
originals.
Reference in new issue View Git Blame Copy Permalink