irtt-rs/docs/irtt-server.md

irtt-server

NAME

irtt-server - IRTT-compatible UDP server

SYNOPSIS

irtt-server [--bind ADDR]... [OPTIONS]

irtt-rs server [--bind ADDR]... [OPTIONS]

DESCRIPTION

irtt-server answers IRTT echo requests over UDP. It is thin orchestration over the reusable irtt-server library: one current-thread Tokio runtime, one or more listeners, and the library's own session/policy logic.

Run with no arguments for the ordinary case:

irtt-server

With no --bind, the server listens on the standard IRTT port (2112) on the wildcard address for both address families, in this fixed order:

1. [::]:2112
2. 0.0.0.0:2112

This is available wherever the platform supports safe wildcard reply-source selection (see Wildcard binds below). Any explicit --bind replaces this default pair entirely rather than adding to it — irtt-server --bind 127.0.0.1:2112 binds only that one address.

If one of the two default addresses cannot be bound because its address family itself has no local support at all — IPv6 disabled on an otherwise IPv4-capable host, for example — the server falls back to serving just the other one instead of failing outright, and says so on startup. Any other reason a default listener fails — the port already in use, permission denied, no safe wildcard reply-source path — is not a family-support problem and is not silently worked around; the invocation fails as it would for an explicit --bind. This fallback applies only to the implicit default pair: an explicit --bind list always keeps the ordinary all-or-nothing behavior described below.

OPTIONS

--bind ADDR

Local UDP address to bind, as ADDR:PORT, for example 127.0.0.1:2112 or [::1]:2112. Host names are not resolved. Repeatable.

Repeat the option to serve several addresses from one process, in the order given. Every listener applies the same policy options, but each keeps its own sessions and tokens, so a session belongs to the address it was opened on. Binding is all-or-nothing: if any address cannot be bound, none are served.

A port of 0 selects an unused port per listener, so two such binds get two different ports.

With no --bind at all, see Default bind above.

--hmac KEY

HMAC key, taken as the UTF-8 bytes of this argument. With a key configured, every request must carry a valid MAC and every reply is authenticated; without one, authenticated requests are dropped. The key is visible in the process arguments.

--max-sessions COUNT

Maximum number of simultaneously live sessions per listener, not per process. Once a listener's table is full, a session-creating open to it is dropped silently; nothing is evicted. Zero refuses every session-creating open.

--max-packet-length BYTES

Maximum echo datagram size a session may negotiate, in bytes. A longer requested length is reduced during negotiation, an open whose mandatory field block would not fit is refused, and inbound echo requests are admitted against the same limit. This is a resource bound, not an MTU.

--min-interval DURATION

Floor on the send interval a session may negotiate. The negotiated interval is still capped at a quarter of the idle timeout afterwards, so a --min-interval above that cap is not the value actually negotiated.

A session's reply allowance refills at the shorter of this configured floor and the interval it actually negotiated. Ordinarily that is the configured floor itself, since the negotiated interval is normally at least as long — a 10ms --min-interval against a 1s negotiated interval refills every 10ms. The two differ only when the idle-timeout cap above pulled the negotiated interval below the configured floor, in which case the shorter, negotiated value is what the allowance actually refills at: a server must not enforce a cadence it did not advertise to the client. Use 0 for no time-based throttling.

--burst COUNT

Echo replies one session may have answered before its allowance has to refill. Use 0 for no allowance at all, which rate-limits every echo request whatever the interval is.

--idle-timeout DURATION

Release a session after this long without a served or rate-limited echo request. The deadline runs from the open, and release is silent. Use 0 to expire a session at the next evaluation; it is not a way to disable expiry.

--max-duration DURATION

Maximum test duration a session may negotiate. A longer request is reduced to it, and a continuous request is answered with it. Omit this flag for no maximum; a maximum of zero cannot be expressed, because a negotiated duration of zero means continuous.

--timestamp-allowance MODE

How many timestamps this server will provide: dual (default, honors a request for send, receive, both, or midpoint timestamps), single (provides at most one timestamp instant; a request for both is negotiated to midpoint), or none (no timestamps at all). The requested clock source is never changed, only which instants are reported, so a single instant is still reported once per requested clock.

--no-dscp

Refuse to provide requested traffic-class marking. Any requested DSCP is negotiated to zero, so the client is told its echo replies will be unmarked, and they are sent unmarked. The session is not refused.

Durations everywhere in this command accept an integer followed by a unit: ms, s, or m.

OUTPUT

Each bound endpoint is printed on startup, once every listener is up, which also resolves a port of 0:

irtt-server: listening on [::]:2112
irtt-server: listening on 0.0.0.0:2112

Ctrl-C stops the server gracefully.

MULTIPLE LISTENERS

Every invocation runs through the same multi-listener path, so one address — whether from the default pair or a single explicit --bind — is an ordinary set of one rather than a separate mode. The policy options above apply to every listener, but listeners are otherwise independent: each has its own sessions and tokens, and --max-sessions bounds each listener rather than the process. If any listener fails while running, the others are shut down with it rather than leaving a service configured for two families answering on one.

Wildcard IPv4 and IPv6 listeners may share one port, as the default pair does.

SERVER FILL

Echo replies fill their payload according to the negotiated ServerFill mode, which a client requests with irtt-client's --sfill (see irtt-client(1)):

• none: zero-filled.
• rand: random bytes.
• pattern:HEX: the given repeating hexadecimal pattern.

Every valid descriptor is honored. A descriptor the server cannot parse, and a client that expresses no fill preference at all, both get the default pattern:69727474, i.e. the repeating bytes 69 72 74 74 (irtt).

WILDCARD BINDS

An explicit interface address works on every supported system. A wildcard bind such as 0.0.0.0:2112 or [::]:2112 reads each request's local destination from packet metadata and sends that request's reply from the same address, so a client on a multi-homed host is answered from the endpoint it actually contacted.

That reply-source selection is implemented on Linux, macOS, and FreeBSD. Elsewhere, a wildcard bind is refused at construction rather than served from a routing-table-selected source address a client would discard — this also applies to the zero-argument default, which will fail with a clear error asking for an explicit --bind on such a platform. This correctness rule is deliberate and is not weakened by the zero-argument default.

EXAMPLES

Run with the default wildcard listeners on the standard port:

irtt-server

Bind a single explicit address:

irtt-server --bind 127.0.0.1:2112

Through the irtt-rs dispatcher:

irtt-rs server --bind 192.0.2.10:2112

Serve two explicit addresses from one process:

irtt-server \
    --bind 0.0.0.0:2112 \
    --bind [::]:2112

Apply session policy:

irtt-server \
    --bind 192.0.2.10:2112 \
    --max-sessions 512 \
    --idle-timeout 30s

Restrict optional capabilities:

irtt-server \
    --bind 192.0.2.10:2112 \
    --timestamp-allowance single \
    --no-dscp

Require authentication:

irtt-server --bind 192.0.2.10:2112 --hmac secret

EXIT STATUS

0 on a clean shutdown (Ctrl-C), nonzero if binding fails or a listener fails while running.

LIMITATIONS

• No hostname resolution, interface expansion, daemonization, or configuration file — binds are explicit addresses only.
• Wildcard reply-source selection is unavailable outside Linux, macOS, and FreeBSD; such platforms must bind explicit addresses.

SEE ALSO

irtt-client(1), irtt-tui(1), irtt-rs(1), and irtt-server --help for the full option list.